Inhouse product
✅ Product Description:
Temperature can affect reading levels, our water meterr's automatic temperature compensation can ensure that you're getting the best possible reading.
3-in-1 TDS Temp pH Tester 0.01 High Precision Water Quality Tester Digital pH Meter for Household Drinking Pool and Aquarium.
Unlike other ph meter for water hydroponics that only have a range of 0 °C-50 °C, ours ph meter for water hydroponics has a even better range of 0 °C-60 °C (32 °F-140 °F).
✅ Calibration Ph Steps:
Before calibration, add the pH4.00/pH6.86/pH9.18 buffer powder into beaker with 250ml (under the temperature of 25℃) of distilled water, then stir until the powder has completely dissolved.
Press the ON button to turn on
Press the TEMP / CAL button, adjust to pH mode
Place the electrode in the pH 4.00/ 6.86/ 9.18 standard solution
Wait for the readings to stabilize (usually 5~10 Seconds)
Press and hold the TEMP/CAL button for 6 seconds, then you can see corresponding value flashing 3 times which means calibration of pH is completed.
✅ What you get:
1 * B&K 3 in 1 TDS/Ph/Temp Meter
✅ Quality Assurance:
24/7 Phone call, email and WhatsApp Supports.
✅ Note:
Clean the electrode with distilled water Every time before and after use, gently wipe it with a clean, soft cloth when you're done before capping it again.
Be sure to add water according to the required ratio, otherwise it will affect the accuracy of the calibration and increase the error.
No Backlight.
Please allow slight dimension difference due to different manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.